In high-speed circuit racing, motocross, and custom performance builds, unsprung weight reduction directly elevates suspension response and handling precision. Verqo Titanium Products Co., Ltd. manufactures structural Ti-6Al-4V components that withstand extreme thermal loads, road vibration, and severe corrosion without degrading.
Replacing steel wheel axles and brake hardware with GR5 titanium strips critical reciprocating mass from the suspension, significantly accelerating damping rebound and steering turnaround.
With an extremely low thermal conductivity of roughly 6.7 W/m·K (compared to 205 W/m·K in aluminum), our vented titanium caliper pistons stop heat transfer to brake fluid, preventing lever fade.
Backed by 10 years of OEM/ODM machining, our facility produces custom lengths, thread pitches, safety-wire drilling, and bespoke geometry directly from client technical drawings.
Explore our export-ready motorcycle product matrix. All parts are fabricated from certified Ti-6Al-4V titanium alloy, batch-inspected with optical projectors, and available in multiple durable finishes.
High-strength titanium front and rear wheel axles available in lengths of 205mm, 235mm, 260mm, and 280mm for sport and motocross motorcycles.
Hard-coat DLC/PVD black finish provides extreme surface hardness, scratch protection, and corrosion defense for street fighters and cafe racers.
Specialized off-road motocross drive shaft engineered for heavy shock resistance, featuring precision knurled shoulders and custom thread pitches.
Lightweight swingarm brake rocker designed with high torsional rigidity for instant rear brake responsiveness and distinctive custom aesthetics.
Complete rear brake lever mechanism with titanium pivot bolt, splined coupler, and return spring seat. Packaged ready for aftermarket retail.
High-precision cable ferrule adjusters, jam nuts, and refueling line fittings offering smooth throttle response and corrosion-free operation.
Available in multiple eye-catching anodized and heat-treated hues. Precision centerless ground with rolled threads for prolonged fatigue lifecycle.
Machined from solid titanium bar stock for Brembo RCS master cylinders. Immune to corrosive DOT 4 and DOT 5.1 synthetic brake fluid.
Drastically lowers heat transfer from sintered brake pads to the caliper body. Retains dimensional consistency under 600°C racing conditions.
Engineered with radial ventilation ports around the piston crown to circulate cooling airflow and isolate extreme pad heat on track-day superbikes.
Specially tempered titanium alloy wire spring engineered for superior cycle fatigue life, crisp lever return feel, and immunity against salt spray.
Bespoke geometric components including caliper brackets, foot peg pins, steering damper mounts, and rear-set hardware machined to custom tolerances.
Get full technical dimensions, torque specifications, CAD blueprints, and volume wholesale pricing for distributors and racing teams.
Motorcycle axle shafts and brake components are mission-critical safety hardware. Verqo enforces strict chemical verification and mechanical stress testing to ensure zero failure under race track and street conditions.
| Performance Metric | Verqo GR5 (Ti-6Al-4V) | Commercial Grade 2 (CP Ti) | High-Tensile 10.9 Alloy Steel |
|---|---|---|---|
| Ultimate Tensile Strength | ≥ 895 – 930 MPa | ≈ 345 – 450 MPa (Not load-bearing) | ≈ 1,040 MPa |
| Yield Strength (0.2% Offset) | ≥ 828 MPa | ≈ 275 MPa | ≈ 940 MPa |
| Density / Specific Mass | 4.43 g/cm³ (43% lighter) | 4.51 g/cm³ | 7.85 g/cm³ (Baseline) |
| Thermal Conductivity (W/m·K) | 6.7 (Superior heat barrier) | 16.4 | 46 – 52 (Transfers heat quickly) |
| Corrosion Resistance | Immune to DOT fluid, rain, road salt | Excellent | Requires plating; oxidizes over time |
| Primary Application | Axles, caliper pistons, rocker arms | Fairing screws, decorative badges | OEM high-load heavy hardware |
From initial design consultation to protective export packaging, Verqo Titanium Products Co., Ltd. operates with a documented ISO-aligned quality system in Baoji, Shaanxi.
Every batch of titanium bar stock undergoes spectrometer chemical analysis and ultrasonic flaw detection. Mill Test Certificates (MTC 3.1) are archived and provided upon request.
Unlike machined threads that cut across the grain flow of the titanium alloy, our critical wheel axle threads are rolled under high pressure, increasing fatigue endurance by over 30%.
Using computerized micro-arc oxidation and physical vapor deposition, we ensure vibrant, UV-resistant burnt blue, gold, and diamond-like black coatings that will not chip or peel.
GR5 (Ti-6Al-4V) titanium delivers a tensile strength over 895 MPa while being approximately 43% lighter than carbon steel. Reducing unsprung rotating mass at the wheel hubs sharpens suspension reaction, improves high-speed cornering stability, and completely eliminates rust or corrosion caused by road salt and weather.
Titanium has an exceptionally low thermal conductivity (approx. 6.7 W/m·K compared to 205 W/m·K for aluminum and 50 W/m·K for steel). Vented titanium pistons form an effective thermal barrier that prevents extreme friction heat from transferring into the brake fluid, substantially reducing brake fade and fluid boiling during intensive track sessions.
Because titanium forms an instantaneous protective oxide layer, high contact friction during dry torquing can cause thread micro-welding (galling). We recommend applying a nickel- or copper-based anti-seize lubricant or molybdenum disulfide grease to the threads, reducing tightening torque by approximately 10-15% compared to dry steel specs.
Yes. With 10 years of OEM and ODM engineering expertise, our factory in Baoji operates multi-axis CNC turning and milling centers. We process custom orders directly from STEP, IGS, DWG, or physical samples, maintaining dimensional tolerances within ±0.01 mm.
In-stock items ship within 24 to 48 hours. Rapid prototyping for custom drawings typically takes 7 to 10 days, while bulk production runs are usually fulfilled in 18 to 25 working days with express global air shipping via DHL, FedEx, or UPS.